2021 First Container of SG600 2.2kw to 110kw Mppt Solar Pump Inverter
Thanks for customer turst , a cantainer of Solar pump inverter will be sent to Yemen.
ZK SG600 Solar pumping systems can be applied to all forms of daily use, water pumping for drinking water supply for remote villages and farms without connection to the water grid, for agricultural use such as live stock watering, agricultural irrigation, forestry irrigation, pond management, desert control, and industrial use such as waste water treatment etc.
The PV generator, an aggregation of PV modules connected in series and in parallel, absorbs solar irradiation and converts it into electrical energy, providing power for the whole system. The pump inverter controls and adjusts the system operation and converts the DC produced by the PV module into AC to drive the pump, and adjusts the output frequency in real-time according to the variation of sunlight intensity to realize the maximum power point tracking (MPPT).
SG600 solar pump inverter ( drive) is customized to operate in dual supply mode (AC and DC), so the grid connected supply is used in the absence of energy from PV cells. This inverters function with the latest in technology maximum power point tracking (MPPT) algorithm to derive maximum power from the PV cells at any instant.
1. Maximum power point tracking (MPPT) with fast response speed and stable operation efficiency > 99.6%;
2. High speed running when sunlight radiation is good, frequency reduce fast when sunlight is become weak, stop running when output frequency lower lower limit frequency setting.
3. Suits for most 1/ 3 phase AC pumps and AC PMSM high efficiency pumps.
4. The working voltage of solar panel can set by manual or MPPT automatically tracking
5. Compatible with dual power input, AC grid and DC power supply input simultaneously.
6. Built in automatic sleep-wake up function, start by timer is option.
7. Dry run (under load ) protection, Pumps loss phase protection, over current protection...
8. Pumps maximum current protection
9. Low input power protection
10. Lowest stop frequency protection
11. The PQ (power/flow) performance curve enables calculating the flow output from the pump
12. Digital control for fully automatic operation, data storage and protective functions
13. Intelligent power module (IPM) for the main circuit
14. LED/LCD display operating panel and support remote control
15. Low water probe sensor, and water level control function
16. Strong lightning protection
17. Easy operation and Voc voltage auto detection function
18. GPRS function is option for remote start and stop, remote parameters setting.
19. Clock relay card for timing stop and stop control
